How To Clean Your Light Fixtures Like A Profinehomelamps
Getting a new light fixture in your home can be a fantastic way to compliment a living space. It can be the highlight of your home. But do you know that light fixtures tend to be a resting place for bugs? If it’s been a while since you’ve cleaned yours, you could have accumulated a bug graveyard over your dining room table or living space. So, depending on what type of light fixture you’re working with, you might need an extra set of hands to fix the problem. If that’s an option, take it! There are many good cleaning services in your area to count on, here is one example that serves the New York area, NYC Cleaning Services . Also, in this article, we’ll give you helpful tips and advice on how you can clean your ceiling lights like a pro.
The first step that you need to take when it comes to cleaning a light fixture is safety. How are you going to access it? If a particular installation is suspended way up high in the air, then you might need a proper ladder, or maybe just a step stool or potentially a scissor lift. Aside from that, a stable working space is also required. When cleaning the lights, ensure that all power is off to avoid any electrical shock. Position the ladder where its feet are flat on the floor, to prevent tipping and accidents. Adjust it as needed, so you won’t have to stretch to reach out to a particular structure.
Tools and Supplies
Make a checklist of all the tools and supplies that you need beforehand. The last thing you want to happen is being engrossed in what you’re doing, only to realize that you’ve forgotten something important. It also helps to cut the time you spend running up and down the ladder. Here are the things that you will need:
- Lint-free cloth
- Dusting sheets
- Water in a spray bottle
- All-purpose cleaner
- Flathead screwdriver
- Phillips head screwdriver
- Canned air
- Replacement bulbs
Different Types of Fixtures Require Different Types of Care for The Best Results
You can effectively clean chandeliers by following these steps:
- Take out the bulbs and wash it with a soft, clean cloth.
- Carefully note which particular crystal goes in when you reassemble later on.
- Put crystals, pendants, in saucers in warm water with soap.
- Carefully wipe gently, and dry as soon as you can to avoid water spots from forming.
- Use a moist cloth to wipe down the base.
- Carefully reassemble the pieces.
When it comes to handling flush mount ceiling lights, take off the covers and place them in warm water with soap. After removing and wiping down the bulbs, use a moist cloth to clean the fixture. Clean and dry the cover afterward.
You can clean most pendant lights even in place. After wiping down the bulbs, you can again use a moist cloth to clean the cables, globes and extension cords. If you have more complex fixtures, you may need to get the globes and soak it with warm water with soap.
For LED lights, take it off and carefully wipe the bulbs. Use a moist cloth to clean the inside and outside of the canisters. Dry it thoroughly afterward.
Do It Step By Step
Turn fixtures off: This might be basic for some, but it’s vital. It’s for your safety, to ensure that there’s no power running through the fixture. It can be as simple as turning off the switch, but to be on the safe side, you can shut off the power at the breaker.
Remove shades: If your light fixture has shades that are removable, then remove it carefully. Put the shades on a safe, flat space. You can also use towels and blankets under hanging fixtures as a safety precaution, to save anything that might be dropped.
Clean the frame: Once you remove the shades, clean the structure using the method depending on what should be used best on a particular material, as it might require unique cleaning methods. Use manufacturer instructions as a way to clean it if you’re not sure.
Glass and porcelain: Etched, opal and blown glass are one of the easiest types to clean. Generally, clean off the dust, then wipe it down afterward with a lint-free cloth.
Crystal: One of the trickiest materials out there to work with are crystals. So, try to be extra careful to keep those facets sparklingly clean. A shot of canned air will remove all the basic dust build-ups. For a deeper clean, you can buy a specialty crystal cleaner in your local hardware store.
Metal: Wipe light fixtures made of metal with a clean, moist cloth. A metal or glass cleaner removes greasy and stubborn spots and you’ll get a more high-shine finish. • Use cloth and paper: This should be cleaned regularly as it the most susceptible to dirt and dust. Knock off the dust with canned air, and wipe the rest with a dusting sheet.
Wood: Cleaning this type of material depends on the finish. Fabric shades used canned air to get rid of the dense dust and finish it off with a clean dusting cloth. In heavy or raised grain, dust tends to settle on the deeper ridges, and it’s easy to catch the fibers.
Acrylic and plastic: These types of materials are easy to take care of. Just wipe off the surfaces with a damp cloth to get rid of the stubborn smudges.
Get Professional Help
Do you know that according to the U.S. Department of Energy, dirty light bulbs give off much less light than cleaner ones? But cleaning light fixtures can sometimes be a hassle, especially if you have a hectic schedule. After all, it does require cumbersome tools, lots of cleaning materials and a steady hand. To ensure that your light fixtures are always in top shape, seek out professional Deep Cleaning Services NY. Doing so freshens up your home. Deep cleaning will get your home’s light fixtures in top shape. A cleaning professional will usually direct their attention to vital areas that you have forgotten to clean over time.
There you have it. By knowing how to clean the beautiful light fixtures in your home effectively, you’ll brighten up your home a little more.